India TMT personnel training on TMT’s primary mirror polishing technology at Coherent Inc., in December 2021 - Colleagues from the Indian Institute of Astrophysics are being trained on mirror polishing techniques on-site at the Coherent facility in California.
Image credit: TMT International Observatory / ITCC
The fabrication of TMT’s primary mirror segments at Coherent Inc. in California continues to progress well. To date, a total of 19 M1 polished roundels have been delivered to TMT’s secure warehouse facility for storage.
“TMT is very excited that the Coherent production team is so active and efficient,” says Ben Gallagher, leader of TMT’s Telescope Optics group. “The production is ramping up and we anticipate getting close to 50 additional roundels manufactured in California in 2022!”
Each roundel is being produced in accordance to strict technical specifications, and meeting these requirements is critical to the success of the TMT Observatory. To ensure that each segment will perform satisfactorily, optical interferometers are used to closely analyze and control the roundels, and to verify the quality of their polished surfaces. All interferometric metrology data from Coherent were reviewed using independent analysis at NASA's Jet Propulsion Laboratory (JPL), which is partnering with TMT. A variety of analyses successfully met JPL’s chart of performance metrics. The surface measurement table from Coherent met and even exceeded the TMT’s expectations.
Shipping of six additional TMT finished roundels at Coherent facility in California, December 2021 - From left: India-TMT Coordination Center (ITCC) engineers Alikhan Basheer and S. Sriram; Coherent expediter Scott Kelly; Glen Cole (TMT); Coherent engineer and management Lou Marchetti and Michael Orr in front of the loading truck prepared to leave for TMT’s warehouse.
Image credit: Coherent Inc.
“Indeed, we are thrilled and confident about the roundels’ quality,” says Glen Cole, TMT lead Optical Fabrication engineer, while visiting the Coherent production facility in the Bay area last December. “Being out there and looking directly at the improvements made to optimize the efficiency of all processes is very impressive.”
In addition to inspecting the delivered roundels, Cole was also co-training at an extended coaching session provided for the India TMT Coordination Centre’s (ITCC) optical engineers.
As soon as Covid-19 travel restrictions were lifted, two TMT India engineers flew to California for a training on producing TMT’s aspherical polished roundels using the Stress Mirror Polishing technology. During this instructional phase, which is taking place independently of Coherent’s mirror production, Coherent engineers are providing hands-on coaching sessions on the operations of the specific tools and equipment that ITCC engineers will use in their newly built India-TMT Optics Fabrication Facility (ITOFF)1. The coaching also includes instruction on the qualification tests performed during roundel production. In the coming months, a third person will come from India for a second phase of training.
Coherent’s hands-on training in December 2021 - On-site support and training program held at Coherent facility - Glen Cole, S. Sriram and Alikhan Basheer take part in the learning program about the mirror polishing, in which mirror blanks are converted into roundels meeting all necessary requirements.
Image credit: TMT International Observatory / ITCC
“Coherent is honored to host our guests from India and share our expertise in Stress Mirror Polishing technology,” says Lou Marchetti, Development Engineer at Coherent leading the polishing training effort. “We look forward to having that team join us in polishing these mirrors to perfection.”
“This past year has been very good in terms of production, and also for the comprehensive training work and the best practices involved in precise mirror polishing,” added Cole. “We have seen excellent cooperation between TIO and Coherent.”
ITCC has developed a dedicated polishing facility (ITOFF), inaugurated near Bengaluru in 2021, that will enable India-TMT to more efficiently handle the polishing and testing of its 84 primary segments. Following the current training, Coherent will ship a set of production equipment that was purchased by IIA to support their production in ITOFF. TMT’s Indian partners will soon convert TMT’s Clearceram-z mirror blanks from OHARA/NAOJ in Japan into high-quality surface hexagonal mirror segments.
TMT M1 Segment allocation – December 2021 - TMT mirror blanks, made of the zero-expansion glass ceramic Clearceram-z by NAOJ /TMT Japan, are being distributed among the four partner countries (Japan, US, India and China) for the surface polishing process.
Image credit: TMT International Observatory
The Thirty Meter Telescope (TMT) Project has been developed as collaboration among Caltech, the University of California (UC), the Association of Canadian Universities for Research in Astronomy (ACURA), and the national institutes of Japan, China, and India with the goal to design, develop, construct, and operate a thirty-meter class telescope and observatory on Maunakea in cooperation with the University of Hawaii (TMT Project). The TMT International Observatory LLC (TIO), a non-profit organization, was established in May 2014 to carry out the construction and operation phases of the TMT Project. The Members of TIO are Caltech, UC, the National Institutes of Natural Sciences of Japan, the National Astronomical Observatories of the Chinese Academy of Sciences, the Department of Science and Technology of India, and the National Research Council (Canada); the Association of Universities for Research in Astronomy (AURA) is a TIO Associate. Major funding has been provided by the Gordon & Betty Moore Foundation.
For more information about the TMT project, visit tmt.org, or follow @TMTHawaii.